The Angelsounds Fetal Doppler is an easy-to-use doppler for expectant mothers to hear their baby's heartbeat from 12-16 weeks as well as kicks hiccups and blows, all from the comfort of your own home. Great for reassurance and to bond with baby from an early stage.
Key Features:
- Designed for mothers-to-be to hear their baby's heartbeat at home.
- Non-invasive and easy to use.
- Hear the heartbeat from 12-16 week of pregnancy.
- Listen closely and you might even hear kicks, hiccups and blows!
- Conforms to all the necessary EU Safety Standards and Regulations and has been awarded certificates from these bodies (EC Directive 93/42/EC).
- CE approved.
How to Use:
- Switch on AngelSounds and put the headphones on.
- Apply some gel to your belly and the ultrasound probe.
- Place the probe on your belly and slowly direct it to the correct location.
- Move the probe back and forth until you receive a good signal.
- Plug a second pair of headphones in and share this indescribable experience with your partner, your family and friends!
Box Contains:
- 1 x DV battery.
- 1 x Headphones.
- 1 x Full instructions for use.
- Please note for the purpose of hygiene this item is non refundable. This does not interfere with your statutory rights.
Relevant blogs:
Related Products:
Frequently Asked Questions
Is the AngelSounds JPD100S Fetal Doppler safe for home use?
Yes, the AngelSounds JPD100S Fetal Doppler is designed for safe home use. It conforms to the necessary EU Safety Standards and Regulations, including the EC Directive 93/42/EC, and carries the CE approval marking. However, it's important to note that this device is intended for personal reassurance and bonding purposes and should not replace professional medical evaluations. If you have any concerns about your pregnancy, consult your healthcare provider.
At what stage of pregnancy can I start using the AngelSounds JPD100S Fetal Doppler?
You can begin using the AngelSounds JPD100S Fetal Doppler from the 12th week of pregnancy. The fetal heartbeat becomes more detectable as the pregnancy progresses, making it easier to locate and hear the heartbeat after this period.
How do I use the AngelSounds JPD100S Fetal Doppler to hear my baby's heartbeat?
To use the AngelSounds JPD100S Fetal Doppler:
Prepare the Device: Insert the 9V battery into the device and connect the headphones to one of the headset sockets.
Apply Gel: Apply a small amount of ultrasound gel, baby oil, or lotion to your lower abdomen or directly onto the transducer.
Turn On the Device: Switch on the device using the on/off/volume knob and set the volume to a comfortable level.
Locate the Heartbeat: Place the transducer on your lower abdomen and move it slowly until you detect the fetal heartbeat. It may take some time to find the correct position, especially in early stages.
Listen and Share: Once the heartbeat is detected, you can listen through the headphones. The device also allows you to record the heartbeat to share with family and friends.
What should I do if I can't hear my baby's heartbeat with the AngelSounds JPD100S?
If you're unable to hear the fetal heartbeat:
Check the Volume: Ensure the volume is turned up to an audible level.
Use Sufficient Gel: Apply an adequate amount of gel to reduce static and improve sound quality.
Adjust the Transducer Position: Move the transducer slowly and try different angles on your lower abdomen.
Verify Headphones and Connections: Ensure the headphones are functioning properly and securely connected.
If you still cannot detect the heartbeat, consider trying again later, as the baby's position may affect audibility. If concerns persist, consult your healthcare provider.
Can I record my baby's heartbeat using the AngelSounds JPD100S Fetal Doppler?
Yes, the AngelSounds JPD100S Fetal Doppler includes a recording cable that allows you to connect the device to a recording device, such as a computer or smartphone. This feature enables you to record your baby's heartbeat and share it with family and friends or keep it as a cherished memory.
Do I need to use ultrasound gel with the AngelSounds JPD100S Fetal Doppler?
While the AngelSounds JPD100S Fetal Doppler can be used without ultrasound gel, using a coupling agent like ultrasound gel, baby oil, or lotion is recommended. These substances help reduce static and improve sound quality, making it easier to detect the fetal heartbeat.
Is the AngelSounds JPD100S Fetal Doppler suitable for professional medical use?
The AngelSounds JPD100S Fetal Doppler is designed for personal use and is not intended to replace professional medical equipment. It should be used for bonding and reassurance purposes only. For medical evaluations and monitoring, consult your healthcare provider.
What are the technical specifications of the AngelSounds JPD100S Fetal Doppler?
The AngelSounds JPD100S Fetal Doppler features:
Ultrasound Frequency: 3 MHz
Battery Voltage: 9V (IEC6F22 9V alkaline battery)
Ultrasonic Emitting Power: Less than 10mW/cm²
Audio Output Power: Less than 0.2W
Product Dimensions: Approximately 20 x 7 x 14.8 cm (7.8 x 1.8 x 5.8 inches)
