This Pressure Fit Gate is fitted under pressure and is not screwed on to the door frame or wall. That means you avoid marks and holes in the wall or frame. This type of gate is well suited for use at the foot or top of a staircase and at doorways of utility room, kitchen, bathroom or other rooms.
Top Features:
- Baby Dan is the only manufacturer to produce True Pressure Fit Safety Gates under the new standard
- No drilling means you avoid marks and holes in the wall or frame
- Tested and approved in accordance with EN1930:2011
- Manufactured in Babydan factory in Denmark
- BabyDan is the only safety gate manufacturer to be Cradle to cradle certified (assesses safety, circularity & responsibility of materials & products across five categories of sustainability.
- All BabyDan safety gates are made in Denmark since 1947.
- All BabyDan gates in boxes are made from a minimum of 30% recycled material
- 100% PVC Free - no harmful substances used
- ISO 14001 Certified
Specifications:
- Gate width 151 - 157cm
- Gate height: 72cm
Installation:
- Simple step-by-step high-end 3D animated instructions are supported by Onbox direct to your phone
- Traditional 2D instructions also contained in the box
Box Contains:
- 1 x BabyDan Premier True Pressure Fit Safety Gate
- Use wall cups
- 1 x Instructions and fitting kit
Extensions
Some relevant blogs you may be interested in:
Frequently Asked Questions
What are the key features of the BabyDan Premier Pressure Indicator Gate?
The BabyDan Premier Pressure Indicator Gate offers several notable features:
True Pressure Fit Installation: No drilling required, preventing marks or holes in walls or door frames.
Safety Indicator: Built-in indicator ensures correct installation by displaying a red signal if the gate is not properly fitted.
One-Handed Operation: Easily openable with one hand from either side, facilitating convenient use.
Two-Way Opening: Gate opens in both directions, enhancing accessibility.
Expandable Width: Fits openings from 73.5 cm to 79.6 cm; extendable up to 119.3 cm with additional extensions.
Height: Measures 72 cm tall.
Safety Standards Compliance: Tested and approved in accordance with EN1930:2011.
Sustainable Manufacturing: Made in Denmark using at least 30% recycled materials; 100% PVC-free and ISO 14001 certified.
Cradle to Cradle Certified® Bronze: Assesses safety, circularity, and responsibility of materials and products across five categories of sustainability.
Onbox App Support: Provides 3D animated step-by-step installation instructions accessible via smartphone.
How do I install the BabyDan Premier Pressure Indicator Gate?
To install the BabyDan Premier Pressure Indicator Gate:
Position the Gate: Place the gate in the desired doorway or stairway opening.
Adjust the Spindles: Turn the spindles to extend them until they make contact with the wall or door frame.
Tighten Evenly: Ensure even pressure by tightening each spindle equally.
Check the Safety Indicator: The built-in indicator will display red if the gate is not properly installed. Adjust as necessary until the red indicator is no longer visible.
Verify Stability: Confirm that the gate is securely in place and does not move when pressure is applied.
For detailed guidance, refer to the included 2D instructions or access 3D animated instructions via the Onbox app.
Can the BabyDan Premier Pressure Indicator Gate be extended to fit wider openings?
Yes, the BabyDan Premier Pressure Indicator Gate can be extended to accommodate wider openings:
Available extensions include:
BabyDan Standard Extend-A-Gate Kit: Each kit adds 14 cm (2 x 7 cm).
BabyDan Premier Gate Extension 32 cm: Adds 32 cm.
BabyDan Premier Gate Extension 64.5 cm: Adds 64.5 cm.
Ensure that the total width, including extensions, does not exceed the maximum recommended width of 119.3 cm.
Is the BabyDan Premier Pressure Indicator Gate suitable for use at the top of stairs?
Yes, the BabyDan Premier Pressure Indicator Gate is suitable for use at the top of stairs. Its pressure-fit design allows for secure installation without drilling, making it ideal for both the top and bottom of staircases.
However, it's essential to ensure that the gate is installed correctly and securely, especially in high-risk areas like staircases. Always follow the manufacturer's installation instructions and use the built-in safety indicator to confirm proper fitting.
What materials are used in the construction of the BabyDan Premier Pressure Indicator Gate?
The BabyDan Premier Pressure Indicator Gate is constructed using high-quality materials:
Frame: Made of powder-coated stainless steel, ensuring durability and strength.
Fittings: Durable plastic components that are rigorously tested for safety and longevity.
Additionally, the gate is 100% PVC-free and manufactured using at least 30% recycled materials, reflecting BabyDan's commitment to sustainability.
Does the BabyDan Premier Pressure Indicator Gate come with a warranty?
Yes, the BabyDan Premier Pressure Indicator Gate comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use conditions. For warranty claims or more information, it's recommended to contact the retailer or BabyDan's customer service directly.
