This Pressure Fit Gate is fitted under pressure and is not screwed on to the door frame or wall. That means you avoid marks and holes in the wall or frame. This type of gate is well suited for use at the foot or top of a staircase and at doorways of utility room, kitchen, bathroom or other rooms.
Top Features:
- Baby Dan is the only manufacturer to produce True Pressure Fit Safety Gates under the new standard
- No drilling means you avoid marks and holes in the wall or frame
- BabyDan is the only safety gate manufacturer to be Cradle to cradle certified (assesses safety, circularity & responsibility of materials & products across five categories of sustainability.
- All BabyDan safety gates are made in Denmark since 1947.
- All BabyDan gates in boxes are made from a minimum of 30% recycled material
- 100% PVC Free - no harmful substances used
- ISO 14001 Certified
- Tested and approved in accordance with EN1930:2011
Specifications:
- Gate width: 112.5cm - 118.6cm
- Gate height: 72cm
Installation:
- Simple step-by-step high-end 3D animated instructions are supported by Onbox direct to your phone
- Traditional 2D instructions also contained in the box
Box Contains:
- 1 x BabyDan Premier True Pressure Fit Safety Gate
- Use wall cups
- 1 x Instructions and fitting kit
Extensions
Some relevant blogs you may be interested in:
Frequently Asked Questions
What are the key features of the BabyDan Premier Pressure Indicator Gate?
- True Pressure Fit Installation: The gate is installed under pressure without the need for drilling, preventing marks and holes in walls or door frames.
- Safety Certifications: Tested and approved in accordance with EN1930:2011 standards.
- Sustainable Manufacturing: Made in Denmark since 1947, with all gates containing a minimum of 30% recycled material and being 100% PVC-free.
- Cradle to Cradle Certified® Bronze: Assesses safety, circularity, and responsibility of materials and products across five categories of sustainability.
- ISO 14001 Certified: Demonstrates commitment to environmental management standards.
- User-Friendly Design: Features a one-handed opening mechanism and a built-in safety indicator to ensure correct installation.
How do I install the BabyDan Premier Pressure Indicator Gate?
- Preparation: Ensure the area where the gate will be installed is clean and dry.
- Positioning: Place the gate in the desired doorway or stairway opening.
- Adjusting Width: Extend the gate to fit the width of the opening.
- Securing the Gate: Tighten the pressure spindles until the gate is firmly in place.
- Safety Indicator Check: Ensure the built-in safety indicator shows that the gate is correctly installed.
- Final Inspection: Test the gate to confirm it opens and closes smoothly and is securely fitted.
For detailed, step-by-step 3D animated instructions, download the Onbox app and enter the code specific to your gate model.
Can the BabyDan Premier Pressure Indicator Gate be extended to fit wider openings?
Yes, the gate can be extended to fit wider openings using BabyDan extension kits. The standard gate fits openings from 73.5 cm to 79.6 cm. With extensions, it can accommodate widths up to 119.3 cm. Extensions are available in various sizes, such as 7 cm, 32 cm, and 64.5 cm, and can be combined to achieve the desired width. Ensure that the total width, including extensions, does not exceed the maximum recommended width for safety.
Is the BabyDan Premier Pressure Indicator Gate suitable for use at the top of stairs?
Yes, the BabyDan Premier Pressure Indicator Gate is suitable for use at the top of stairs. Its pressure-fit design allows for secure installation without drilling, making it ideal for areas where permanent fixtures are not desired. The gate features a one-handed opening mechanism and a built-in safety indicator to ensure correct installation. However, always ensure the gate is installed according to the manufacturer's instructions and regularly check its stability to maintain safety.
What materials are used in the construction of the BabyDan Premier Pressure Indicator Gate?
The BabyDan Premier Pressure Indicator Gate is constructed from high-quality powder-coated stainless steel, ensuring durability and strength. The plastic fittings used are rigorously tested for safety and longevity. The gate is 100% PVC-free, aligning with BabyDan's commitment to producing products without harmful substances. Additionally, all BabyDan gates in boxes are made from a minimum of 30% recycled material, reflecting the company's dedication to sustainability.
